Product Description

Application Instructions

• Ensure surfaces to be bonded are clean, dry, and free from contaminants.

• Apply adhesive thinly to both surfaces and assemble immediately.

• Joints can be handled after approx. 1 hour.

• For best results, apply pressure or clamp for 1–2 hours.

• Support bonded work for 6 hours at 20°C.

• Note: Drying times will be extended at lower temperatures.

• Remove excess adhesive with a damp cloth while wet, then sand away dry excess.

• Do not use below 10°C.

• Unsuitable for load-bearing joints.

• Ensure the moisture content of the wood is below 15%.

Storage

• Store in tightly closed original containers.

• Keep in cool, dry conditions and protect from frost.

• Shelf life: 12 months from date of manufacture.

• Shake well before use.

Health & Safety

• Use good working practices (e.g., wear gloves and eye protection).

• Wash off adhesive with soap and water.

• Do not ingest.

• Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

• Keep out of reach of children.

• Full details available on the Material Safety Data Sheet (MSDS).

Contains a biocidal product for preservation.
Active substances: CMIT/MIT and methyl-1,2-benzisothiazol-3(2H)-one.
May produce an allergic reaction.

Key Features

• Conforms to BS EN 204: Class D3

• Easy to clean

• Dries clear

• For general woodworking applications

• Medium viscosity

• Solvent-free

• 10-minute set time