Kelmore – One Coat DPM Fast
Create an account to view pricing.
Kelmore One Coat DPM Fast is a solvent-free, fast-curing 2-part epoxy damp proof membrane developed to protect concrete and screed subfloors from residual moisture and rising damp.
Product Description
| Category | Specification / Information |
|---|---|
| Product Name | One Coat DPM Fast |
| Product Type | Fast curing 2-part epoxy damp proof membrane |
| Areas of Use | Floors, Interior & Exterior, Domestic & Commercial, Heated Screeds |
| Pack Sizes | 5kg & 10kg |
| Colour | Blue |
| Application Temperature | ≥ 10°C |
| Working Time (@20°C) | Approx. 20 minutes |
| Cure Time (@20°C) | Approx. 4½ hours |
| Key Benefit | Combats residual construction moisture and rising damp |
| Suitable Where Structural DPM is Absent | Yes |
| Moisture Tolerance – Cementitious Screeds | Up to 98% RH |
| Moisture Tolerance – Calcium Sulphate / Anhydrite Screeds | Up to 90% RH |
| Suitable for Heated Screeds | Yes |
| Solvent Free | Yes |
| Fast Drying | Yes |
| Suitable Subfloors | Cementitious screeds, calcium sulphate/anhydrite screeds, concrete, ceramic tiles, porcelain tiles, natural stone tiles |
| Compatible Levelling Compounds | LevelMore Absolute 30, LevelMore Pro, LevelMore Flex&Fibre |
| Mixing Method | Mix Part A resin with Part B hardener fully using a low-speed paddle mixer until uniform |
| Application Method | Apply using V-notched trowel and smooth with short-pile roller |
| Recommended Trowels | A2, B1, B2 |
| Minimum Thickness – ≤87% RH | 250 microns |
| Minimum Thickness – 88–98% RH | 300 microns |
| Minimum Thickness – Full DPM Required | 350 microns |
| Minimum Thickness – Calcium Sulphate / Anhydrite Screeds | 350 microns |
| Coverage – 5kg (A2 Trowel) | Up to 12.5m² |
| Coverage – 5kg (B1 Trowel) | Up to 10.5m² |
| Coverage – 5kg (B2 Trowel) | Up to 9m² |
| Coverage – 10kg (A2 Trowel) | Up to 25m² |
| Coverage – 10kg (B1 Trowel) | Up to 21m² |
| Coverage – 10kg (B2 Trowel) | Up to 18m² |
| Drying Time | Hard, dry and tack-free after approx. 4½ hours at 20°C |
| Priming Requirement | PrimeMore Grip can be applied after curing |
| Primer Exemption | No primer required when using LevelMore Absolute 30 or LevelMore Pro within 24 hours |
| Surface Preparation | Surface must be clean, sound, dry and free from contaminants |
| Underfloor Heating Guidance | Switch off 48 hours before commencing work |
| Maximum Recommended Temperature | Avoid application above 30°C |
| Movement Joints | Must not be bridged |
| Crack Repair | Can be mixed with dry sand to fill static joints and cracks |
| Cleaning | Clean tools immediately before product cures |
| Shelf Life | 24 months |
| Storage Conditions | Store unopened between 5°C and 25°C |
| Health & Safety | Appropriate PPE required |
| Standards | Use in accordance with relevant British & European Standards |
Additional Information
| Size | 5kg, 10kg |
|---|
Delivery
Full details for delivery can be found on our dedicated delivery page.
All orders over £250 qualify for free delivery. Orders under £250 will have a £30 delivery charge.
Click and collect is available for free during checkout, from our trade counter at Unit 9 Newbury Works, Coleford, Radstock BA3 5RX.
Trade Accounts
Pricing and ordering on our site is only available for approved trade customers.
Use the link in the header click here to apply for a trade account.
To discuss our product range and opportunities for trade customers, please get in touch with our team.
Related products
Floor Preparation
Consumables & Accessories
Floor Preparation
Floor Preparation